How can i get my child's middle wheels to roll like her outer wheels on her inline skates?

i have made the proper adjustments, but hte inner wheels give no roll, they are abec 3 rated bearings and even when i rotate the wheels, it works except in the middle

How can i get my child%26#039;s middle wheels to roll like her outer wheels on her inline skates?
they%26#039;r either to tight, to much crap in them or just plain crappy bearings. First i%26#039;d try to take them out and clean them and relube them with something better than wd40, wd40 isn%26#039;t a good lube for bearings it doesn%26#039;t last long, getting an actually bearing lub for rollerblade ro skateboard bearings would be best. Then make sure they are tight but also loose enough to spin freely. If they are brand new then they are just simply to tight and need to be lossened up a bit, not much, slowly lossen them until they spin freely good. If all else fails...get some new bearings, abec 5 rated bearings would cost you $15 out the door for all the wheels for a pair of skates. Hope this helps
Reply:Try using some WD40 on them.. It might loosen them up a bit... You can even try sewing machine oil..... Give them a spray with air in a can to clean out any debris that may have became stuck between the bearings... Good luck!
Reply:I believe the best I can tell U is to bring them to a good dealer and while U are at it learn the way to rotate the wheels.( sometimes directions are supplied with ie. ROLLERBLADE) The inner 2 wheels are pro bally lower than the otter wheels and they have most likely carried most of Ur child%26#039;s weight and the inner beerings are frayed more than the outer. The wheels are most likely adjustable and it needs to be dealth with.Most likely U will have to replace all of the beerings or at least the the inners.For a child apec 1 or 3 is OK.



skin disease